Step 1: System should be at the following screen at initial power-up. Please tap the top half of the screen with your fingernail to orient the screen.
Step 2: Please enter your 2.4 GHz WiFi credentials into the WiFi Setup Screen and press OK.
Step 3: System will attempt to connect to the internet.
Step 4: Upon successful connection, there will be the following confirmation. If the connection is not successful, please verify the credentials were correct, including capitalization, and try again. If you are still not successful, please contact Flexline support to discuss additional options.
Step 5: Please enter the license number that was provided by Flexline Fitness. If you do not have this license number, please contact Flexline Fitness to receive one.
Step 6: When the license number is validated, you will receive the following confirmation.
Step 7: Please select a desired station id from the dropdown list. This station id will help coordinate tracking multiple stations that are registered to the same location. It is also used within the API to individually identify the unit broadcasting the data. If you only have one device, leave this field set to 1 and press Ok.
Step 8: The following message will appear signaling that this station is being registered in the system.
Step 9: Upon successful registration, the system will automatically update the software and firmware to the latest version.
Step 10: After the software has been updated, the system will return to the home screen where normal system behavior can resume.